BendPak Inc.

Private and voluntary organisations · Company

Pin Request correction

First report 11 Jan 2023•Latest report 11 Jan 2023

Reports, concerns and published responses

Reports over time

Reports naming this recipient by issue year.

* 2026 is projected from reports observed to 7 Sep 2026.

Reports
1

Naming this recipient

Published responses
0%

Found for named reports

Concerns addressed
0

Across all linked responses

Stated actions
0

Described in responses

Concerns and recipient responses

Statements from BendPak Inc. linked to the concerns in each report. Select any concern, action or position to view the source wording.

  1. West London

    AI-generated summary

    Ashley Michel Bullard · Prevention of Future Deaths report

    This summary was generated using AI from the published report. Please read the original report for the complete account.

    Report summary

    Ashley Michel Bullard died after a Volvo S80 fell from a vehicle lift while he was working underneath it at Wheel Art Ltd. The lift’s freeplay and the alignment of its pads contributed to the pads moving from a structural part of the car to a non-structural part, causing the car to fall and fatally injure him. Concerns included inadequate maintenance, the use of unsuitable bolts, insufficient warnings and manuals, and risks associated with outer lift points and tolerated freeplay in two-post vehicle lifts.

    Read the report on judiciary.uk

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Excessive tolerated freeplay in 2-post vehicle lifts

    Wider context from the report

    “1. Evidence was given that it could be possible to reduce the degree of freeplay in the Bendpak 2-post vehicle lifts. Given lift points positioned close to the edge of the vehicle may be in danger of allowing lifting pads / frame contact pads on the Bendpak XPR9 2-post vehicle lift and possibly other similar 2-post lifts, to move from a position under the structure of the vehicle, to a non-structural part of the vehicle, with a risk of the car leaving the vehicle lift, it appears the level of tolerated freeplay creates a risk of injury or death to those operating the lift. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to ensure engineers read and understand the lift manual

    Wider context from the report

    “2. An experienced Liftmaster employee gave clear evidence that he did not read all of the installation and operating manual for the XPR9 lift, in spite of being said to have received refresher training from his employer less than 5 months before giving evidence. He said he was not required to read the manual when he was trained, even though he had also signed a letter confirming that he had in fact read the manuals for the XPR series. At the time of giving evidence, he was unaware of the torque table and the full extent of the lift maintenance requirements within the installation and operation manual, notwithstanding the fact that tightening of gear ring bolts was considered by all relevant witnesses, to be critical to the safety of the vehicle lift. That employee was said to be presently employed by Liftmaster and Liftmaster was said to presently install and service Bendpak lifts. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to keep lift inspection, maintenance and repair records

    Wider context from the report

    “2. There was no evidence that Wheel Art Ltd ever kept records of inspections, maintenance, or repair of the Bendpak XPR9 lifts in accordance with the Bendpak XPR9 installation and operating manual. Again, whilst Wheel Art Ltd may now use different vehicle lifts, this concern is not focussed on the make or model of lift but on the maintenance of relevant records. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Uncertainty about suitability of narrow vehicle lift points for frame contact pads

    Wider context from the report

    “2. It is unclear whether a narrow vehicle lift point is suitable for 2-post vehicle lifts using frame contact pads, or whether a better fitted lifting pad adaptor is available. Evidence was provided by an HSE expert engineer, that some form of slotted vehicle lift pad would be better suited when using a 2-post vehicle lift to raise a car by way of the narrow outer lift points that are more often used with vehicle jacks. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Inconsistent communication of manual use and gear ring bolt responsibilities to lift owners

    Wider context from the report

    “1. There was little evidence of consistent practice amongst Liftmaster workers regarding informing the owners of vehicle lifts of the need to read the installation and operation manual, or in highlighting the important parts of the manual such as the need to tighten gear ring bolts. Liftmaster workers were not always aware that ‘the tightening a ‘safety-critical’ component such as gear ring bolts, were the customer’s responsibility, and hence that was not communicated to customers. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to maintain and verify required clearance around vehicle lifts

    Wider context from the report

    “3. Photographs suggested the clearances recommended by the manufacturer, between the lift posts and the nearest obstruction, were not maintained at the time of the incident. Those clearances were said to be 13 feet at the front of the lift, 11 feet at the rear of the lift, and 5 inches from the sides to the nearest wall. Photographs taken very shortly after the incident, disclose the presence of a different vehicle within just a few feet of the rear of the lift used by Ashley in a neighbouring XPR9 vehicle lift / lift bay. It is unclear to what degree the recommended clearance requirements within the manufacturer’s installation and operating manual were considered or adhered to at installation. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to require vehicle technicians to read the lift manual

    Wider context from the report

    “1. There was no evidence that Wheel Art Ltd ever required vehicle technicians operating the Bendpak XPR9 lift, to read the installation and operating manual or to maintain the lift in accordance with the manufacturer’s recommendations. I am informed that Precision no longer owns any Bendpak XPR9 lifts, but instead uses Hoffman scissor lifts. This concern is not focussed on the make or model of lift but the use of lift operating manuals. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to ensure lifts are maintained in accordance with manufacturer recommendations

    Wider context from the report

    “1. There was no evidence that Wheel Art Ltd ever required vehicle technicians operating the Bendpak XPR9 lift, to read the installation and operating manual or to maintain the lift in accordance with the manufacturer’s recommendations. I am informed that Precision no longer owns any Bendpak XPR9 lifts, but instead uses Hoffman scissor lifts. This concern is not focussed on the make or model of lift but the use of lift operating manuals. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Lack of warnings about using outermost vehicle lift points

    Wider context from the report

    “3. There are no warnings on the Bendpak XPR9 2-post vehicle lift or in its installation and operation manual, that suggests caution or a prohibition on using a 2-post vehicle lift in conjunction with the outer most lift points on the underside of vehicles, that may be positioned on or near the sill or seam of the vehicle and often within a few inches from a non-structural part of the vehicle for lifting purposes. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Lack of clear gear ring bolt specifications in the installation and operation manual

    Wider context from the report

    “6. The specification of the grade and size and torque settings of gear ring bolts provided by Bendpak prior to installation was not sufficiently clear within Bendpak’s installation and operation manual, and appeared to cause confusion amongst engineers tasked with installing the lift and those required to service or maintain the lift. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to obtain confirmation that suppliers received all operational manuals

    Wider context from the report

    “4. At the point of providing suppliers / installers with the lift, Bendpak did not require any form of written confirmation of acknowledgement that suppliers received all manuals that Bendpak intended to provide, and considered important to the operation of the lift. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Lack of consistent British Standards for tolerated freeplay in 2-post vehicle lifts

    Wider context from the report

    “1. There appear to be no British Standards for the safe, acceptable and/or tolerated degree of travel or length of travel in terms of freeplay in 2-post vehicle lifts in the UK. Whilst evidence was provided by the HSE that the industry body SAFed suggested an acceptable degree of freeplay is the diameter of the vehicle lift’s frame contact pad, it is noted that various 2-post vehicle lifts have different diameter pads, and hence there is no consistency in the amount of freeplay tolerated in 2-post vehicle lifts. It was also noted that the diameter of pad in the present case, at 130mm, could allow a frame contact pad, to move from a position underneath the structure of a vehicle, to a position under a non-structural part of the vehicle, which can cause the vehicle to leave the lift. An HSE engineer’s expert evidence was that it might be more sensible for tolerated freeplay to not exceed half the diameter of the frame contact pad. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Failure to ensure replacement of grade 4.8 gear ring bolts in existing lifts

    Wider context from the report

    “5. There was no evidence as to whether all Bendpak XPR9 2-post vehicle lifts with grade 4.8 bolts had been recalled or whether grade 4.8 bolts had been replaced in all existing XPR9 lifts, nor any evidence as to what efforts had made to contact customers that might still have such lifts in operation, in order to replace grade 4.8 bolts in lifts manufactured after 01.01.2014. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Lack of clear allocation of lift maintenance responsibilities

    Wider context from the report

    “7. It is not clear within Bendpak’s installation and operation manual as to which components and bolts in particular, are the subsequent lift owner’s responsibility to maintain. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Designation of unsafe outer vehicle lift points for 2-post lifts

    Wider context from the report

    “1. Volvo (and/or other manufacturers) appear to designate lift points towards the edge of vehicles, that are near, on, or outside the sill or seam of the underside of the vehicle. Lift points in a position so close to the edge of a vehicle frame, appear to be in danger of allowing frame contact pads on a Bendpak XPR9 2-post vehicle lift, and possibly other similar 2-post vehicle lifts, to move from a position under the structure of the vehicle, to a non-structural part of the vehicle, due to tolerated freeplay within the vehicle lift, leading to a risk of the car leaving the vehicle lift. Whilst multiple lift points are identified in manuals and/or on Autodata, no warning is given with regards to any danger of using 2-post vehicle lifts on the outer most lift points. ”
    Open source report

    Source evidence

    How this individual concern was interpreted

    PFD Monitor created a concise, searchable interpretation from the report wording shown below. The report was sent to BendPak Inc.; that does not assign responsibility.

    PFD Monitor interpretation

    Lack of warnings about dangers of outermost lift points

    Wider context from the report

    “1. Volvo (and/or other manufacturers) appear to designate lift points towards the edge of vehicles, that are near, on, or outside the sill or seam of the underside of the vehicle. Lift points in a position so close to the edge of a vehicle frame, appear to be in danger of allowing frame contact pads on a Bendpak XPR9 2-post vehicle lift, and possibly other similar 2-post vehicle lifts, to move from a position under the structure of the vehicle, to a non-structural part of the vehicle, due to tolerated freeplay within the vehicle lift, leading to a risk of the car leaving the vehicle lift. Whilst multiple lift points are identified in manuals and/or on Autodata, no warning is given with regards to any danger of using 2-post vehicle lifts on the outer most lift points. ”
    Open source report
Back to top

Information checked against published PFD reports and official responses · Data reviewed 7 Sep 2026 · About data quality and limitations

Data last updated 7 September 2026