Recurring concern
Inadequate safety controls for high-risk machinery work
First reported 30 Apr 2018•Latest report 26 Jun 2025
What this concern includes
Includes failures of controls specifically dedicated to safe high-risk machinery work, including hazard identification, risk assessment, safe systems of work, worker competence, supervision and controls for machinery operated near electrical equipment or other serious hazards.
Not included
- Excludes generic workplace safety or risk-assessment deficiencies where high-risk machinery work is not the material safety condition.
- Excludes machinery maintenance, electrical-equipment maintenance and equipment defects where the operational safety controls for high-risk machinery work are not deficient.
- Excludes work-at-height, lifting, vehicle-operation and other named hazard systems when those systems provide the more specific supported boundary.
- Excludes incidents or injuries where no continuing failure in high-risk machinery safety controls is identified.
- Reports
- 6
- Individual concerns
- 9
- Date range
- 2018–2025
- Stated actions
- 5
Distinct published reports
A report can raise multiple concerns
First to latest report issue date
Described in published responses
Reports over time
Reports over time
Reports about this concern issued each year.
* 2026 is projected from reports observed to 7 Sep 2026.
Most frequent recipients
Most frequent recipients
Reports about this concern sent to each recipient.
Concerns and responses across reports
Only concerns grouped under this recurring concern are included. Select any concern, action or position to view the source wording.
-
Concerns raised1
Lack of a risk assessment warning workers about the risks of using machinery near electrical equipment
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
Respondent positions A position is what a respondent says about the concern when they do not describe a specific action.1
-
Position
Further safety work at the sold incident site cannot be undertaken because the respondent has no influence over its tenants.
Stated by Kenny And Murphy Limited
-
Concerns raised1
Failure to assess cleaners against an agreed competence standard for inching
This report raised 4 other concerns. They are not shown here because they do not form part of this recurring concern.
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
Respondent positions A position is what a respondent says about the concern when they do not describe a specific action.3
-
Position
Formal transport safety intervention is the Office of Rail and Road’s responsibility as the independent rail safety regulator.
Stated by Department for Transport
-
Position
Day-to-day London Underground operations and processes fall outside departmental powers and are accountable to the London Mayor through TfL.
Stated by Department for Transport -
Position
Current arrangements, with competent KONE engineers undertaking all inching activities, are considered a clear and safe response to the training concern.
Stated by Transport for London
-
Concerns raised2
Poor perception of risks associated with high-risk machinery
Lack of health and safety management systems for high-risk machinery
This report raised 9 other concerns. They are not shown here because they do not form part of this recurring concern.
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
Actions described in response An action is something a respondent says it has done, is doing, or plans to do in response to the concern raised.5
-
Action
Implement task-specific risk assessments, employee briefings, toolbox talks and annual or change-triggered reviews of control measures.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd -
Action
Strengthen employee induction by requiring review and signed acknowledgement of relevant safety documentation, including risk assessments.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd -
Action
Implement role-specific health and safety training modules covering operational hazards, emergency procedures, reporting and LOLER compliance.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd
-
Action
Maintain external health and safety consultancy providing audits, recommendations, management documentation, legislative updates, training and specialist support.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd -
Action
Appoint a full-time Health and Safety Coordinator and fund IOSH Managing Safely certification and related health and safety training.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd
Respondent positions A position is what a respondent says about the concern when they do not describe a specific action.1
-
Position
Health and safety management risks are addressed through external consultancy, a dedicated coordinator, risk assessments, audits and reviewed control measures.
Stated by Lincs Firewood Company Ltd & D D Dodd & Son Ltd
-
Concerns raised2
Failure to control high-volume music use while operating heavy machinery
Lack of policy governing music and CD use while operating machinery
This report raised 3 other concerns. They are not shown here because they do not form part of this recurring concern.
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
No linked response statementsNo respondent-stated action or position is linked to these concerns in the published data.
-
Concerns raised1
Failure to actively consider drills when assessing risk and identifying hazards during manufacture
This report raised 3 other concerns. They are not shown here because they do not form part of this recurring concern.
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
Respondent positions A position is what a respondent says about the concern when they do not describe a specific action.1
-
Position
The MoD is responsible for the specific content of army drills, although those drills would be considered in any design process.
Stated by BAE Systems
-
Concerns raised2
Relaxation of the stringent system of work for machinery passing
Failure to implement advocated remedial safety measures for machinery passing
This report raised 2 other concerns. They are not shown here because they do not form part of this recurring concern.
Responses linked to these concernsEach statement is shown once, even when linked to more than one concern.
No linked response statementsNo respondent-stated action or position is linked to these concerns in the published data.
Data last updated 7 September 2026